JC battery flex TAG for iPhone 11

Service battery flex from JC for Apple iPhone 11.

Update FIX for iOS version 17.4

After updating to version 17.4, it is necessary to use the 3U Tools program to set the battery capacity to 100% and 0 cycles.

Download the 3U Tools program here.
*It has not been possible to verify how the battery capacity percentage will decrease over time. Once we have tested it long enough, we will update this information.

Articles for iPhone 11 and newer still require the use of the TAG-ON flex.

*This guide also works on older iOS versions.

1. Backup your phone's memory to your computer. In the new process, you need to Flash the system via 3U Tools and then restore the data.
2. Set the original battery (or a battery with the original BMS flex) to a capacity of 100% and reduce the number of cycles to 0 using the TAG-ON Flex programmer.
3. Thoroughly desolder the original flex from the new cell and permanently connect the Tag-On Flex.
4. Insert a non-original battery into the phone and turn it on to trigger a message about a non-original battery in the settings - battery - battery condition and charging.
5. Turn off the device and remove the non-original battery, insert the re-soldered cell with the original BMS flex and Tag-on Flex with modified capacity and cycle count.
6. Connect the phone via cable to 3U Tools, download iOS 17.4, and select the Quick Flash Mode option, download iOS version 17.4, check the Fix battery health during Flash option, then click the blue Flash button (see image).
7. After installation, activate the phone and check in the settings - battery - battery condition and charging.
8. Done, you can now restore the backup from step 1.