JC Battery Flex TAG for iPhone 11 Pro / 11 Pro Max

Service battery flex from JC company for Apple iPhone 11 Pro / 11 Pro Max.

Update FIX for iOS version 17.4

After updating to version 17.4, it is necessary to use the 3U Tools program to set the battery capacity to 100% and the cycle count to 0.

Download the 3U Tools program here.
*It has not yet been possible to verify how the battery capacity percentage will decrease over time. Once we have tested it sufficiently, we will update this information.

Articles for iPhone 11 and newer still require the use of the TAG-ON flex.

*This guide also works on older iOS versions.

1. Backup the phone memory to the computer, in the new process, it is necessary to Flash the system through 3U Tools and then restore the data.
2. Set the original battery (or a battery with the original BMS flex) to 100% capacity and reduce the cycle count to 0 using the TAG-ON Flex programmer.
3. Thoroughly re-solder the original flex to the new article and permanently attach the Tag-On Flex.
4. Insert a non-original battery into the phone and turn it on to trigger a message about a non-original battery in the settings - battery - battery condition and charging.
5. Turn off the device and remove the non-original battery, insert the re-soldered article with the original BMS flex and Tag-on Flex with modified capacity and cycle count into the phone.
6. Connect the phone via cable to 3U Tools, download iOS 17.4 and select the Quick Flash Mode option, download iOS version 17.4 and check the Fix battery health during Flash option, then click on the blue Flash button (see image).
7. After the installation, activate the phone and check in the settings - battery - battery condition and charging.
8. Done, you can now restore the backup from step 1.